The labor day weekend project? Replacing a few more rotten boards in the lanai.
This has been an ongoing project for years, including a few more boards to replace this summer. Over the last few weeks I have replaced half a dozen boards in the lanai.
I write this as I wait for paint to dry. There are three more big gaps in the lanai waiting for new boards. Those boards have been cut to size, drilled, and are almost ready to screw into place. Deb bought me another box of decking screws last time she was in Kona, should have this done shortly.
Unfortunately the original builders scrimped a bit when building the lanai. No paint on the ends of the boards, no paint underneath, and no paint on the joists. Where the lanai is undercover that has not been a problem, where it is exposed to the weather that has resulted in a fair amount of damage.
Unlike the carpenters who did the original work, I am painting each board on all surfaces before installation. I also clean and paint the top edges of the joists underneath while they are exposed. This should slow down the damage due to exposure.
The last challenge is to get the gaps right. Much of the lanai is nicely spaced between the boards. There is a zone where the gaps are all wrong, the boards right against each other. This is also right where the drip line is from the roof and most of the damage is. The result is a lot of careful measurement and ripping the boards to get the gaps looking good again.
I have two or three more boards identified as needing replacement, but not in any great hurry. They can wait for another weekend. Just need to wait for the latest round of paint to dry and I can screw the next three boards into place.