SMA and Subaru
Gazing into The Caldera
Rockmover Wrasse
A Changing Sky
Gazing up at the sky while reading the old texts one would not be amiss in believing that the stars never change. Indeed there are many who insist vehemently that the stars are eternal and unchanging. But the stars do indeed change, often quite visibly, sometimes within the span of a human lifetime.
One such star is L2 Puppis.
A bright star, one of the few naked eye variable stars that could be seen to fade and reappear without the aid of a telescope much like the far more famous stars Mira and Algol. On star charts the star is found prominently drawn at magnitude 4, buf if you attempt to locate it today you will not find it without the use of a telescope.
I first encountered this star quite recently while starhopping through southern Puppis with an 8″ telescope from the driveway. The chart showed two bright stars close together, L1 Pup and L2 Pup, while the view in the finder ‘scope showed only one bright star.
Continue reading “A Changing Sky”Solo Stars at Kaʻohe
Morning Observing
First quarter moon… Telescope time.
I find myself reliably rising early, often around 4am, something that seemed to have begun during the pandemic. Those who knew me in my younger years may find this a bit unbeliveable, I used to hate mornings, but now?
The other factoid about island mornings. It is almost always clear. The afternoon and evening clouds have dissipated and clear skies are the rule.
Combine these bits with a love of the sky and the result is morning observing sessions, often half a dozen mornings will be spent out with a telescope in those couple weeks the Moon is absent from the morning sky.
Get up, shrug on some ratty old clothes, and wheel the telescope out of the garage. The ‘scope of choice is almost always the old Astrola, even with larger and more sophisticated telescopes available there is just something about using that old manual ‘scope that I find satisfying.
Perhaps the lack of computer or digital setting circles means it is my own skill enabling my path among the stars. The Astrola does have manual setting circles, but I rarely use those. A star chart, a finder, and starhopping allow me to wander through rather than jump about… I just see more, often stumbling across unexpected bits of beauty.
I have upgraded the Astrola a bit lately, adding a larger finder ‘scope with a wide field eyepiece. It is a 50mm 3D printed finder of my own design allowing me to see more sky at once with fainter stars.
There are a few more days until the bright Moon crosses into the morning sky, a few more mornings you will likely find me out with the ‘scope.
A Tool Rack
Building some small telescopes there are tools scattered across the workbench. Hex drivers are the most common tools on the bench to deal with the cap head socket screws I use for everything in my designs.
The hex drivers are supplied with a vinyl pouch. While a pouch may be a good solution for storing the tools, it is not a good solution for using the tools. I have to take out all of the drivers to find the one I want, invariably a small size buried under the bigger tools. The result is a scatter of tools across the bench and constantly trying to remember where I set down the one I need.
Sure, you can buy a nice little stand or rack, but they seem to be either cheaply made or expensive.
With a 3D printer available you see where this is going.
If you like what you see you can download the design at my place on Cults3D.
The design works very nicely, organizing the drivers where I can find them quickly and conveniently. Now to make a couple more racks for the small Wiha drivers I use for fine work and another for a set of larger screw drivers.
A Battery Caddy for the AM5
The ZWO AM5 telescope mount is a great piece of kit… It integrates very well with software allowing easy computer control, just click and go. The mount tracks wonderfully allowing excellent astrophotos. It is small, does not require a counterweight for smaller ‘scopes, and precise polar alignment is a breeze.
The mount is not without issues… Without a camera integrated into the system the GOTO accuracy is awful, using the mount as a visual mount is frustrating. You really need to have at least a guide camera and the ASI Air computer connected to allow to plate solving and automatic correction of the position at the end of each slew to a new target.
Another issue is that the mount has no concept of cord wrap. It will happily spin around and around as you wander across the sky. In equatorial mode this is not an issue, in alt-azimuth mode this runs the risk of damaging your equipment if you do not notice the power cord getting wrapped up on the mount in the dark.
Yes, I did that.
Continue reading “A Battery Caddy for the AM5”Awaiting Dark
Passing Cloud
